GE FANUC SERIES 90-30 PLC Digital I/O Module IC697PWR711 FACTORY SEALED
Product Description:
GE Fanuc Discrete input module for 90 - 30 series PLC offers 16
input points with one common power input terminal. It requires an
AC power source for convenient operation. Module has LED indicators
at the top to offer ON/OFF status of each point. Module has circuit
wiring information on the surface towards the inside and circuit
identification information on the outside surface. Module has a
voltage rating of 120 VAC at 50/60 Hz, 0 - 132 VAC at 50/60 Hz,
input current rating of 12 milli-Amps and a power rating of 90
milli-Amps at 5 VDC. It has a maximum ON response time of 30
milli-seconds and maximum OFF response time of 45 milli-seconds.
Module is compatible with input devices such as pushbuttons, limit
switches and electronic proximity switches. Input/output module
provides the interface between the PLC and external input devices
such as proximity sensors, push buttons, switches and BCD
thumbwheels. It supports different voltage ranges, types, current
capacity, isolation and response time to meet your application.
Product Details:
Input modules provide the interface between the PLC and external
input devices such as proximity sensors, push buttons, switches and
BCD thumbwheels. Output modules provide the interface between the
PLC and external output devices such as contactors, interposing
relays, BCD displays and indicator lamps. This module requires an
AC power source, it cannot be used with a DC power source.
Product Summary:
Type of Device: Power Supply Module, 100W, 120/240 VAC or 125 VDC
Nominal Rated Voltage: 120/240 VAC, or 125 VDC
Input Voltage Range AC Input: 90 to 264 VAC, 47 to 63 Hz
Input Voltage Range DC Input: 100 to 150 VDC
Input Power: 135 watts (typical), 160 watts (maximum)
Description: Power Supply Module
Type of Device: Power Supply Module, 100W, 120/240 VAC or 125 VDC
Nominal Rated Voltage: 120/240 VAC, or 125 VDC
Input Voltage Range AC Input: 90 to 264 VAC, 47 to 63 Hz
Input Voltage Range DC Input: 100 to 150 VDC
Input Power: 135 watts (typical), 160 watts (maximum)
Features: Electronic short circuit overcurrent protection; Two rack
operation from a single power supply; Power Factor correction for
AC operation; Jumper for overvoltage protection devices.
Power Supply Door: The power supply door can easily be opened by grasping the upper
left corner of the door with your right thumb or a fingernail and
gently pulling the door towards you. Use care when opening the door
since pulling from the bottom can cause the hinge or the door to
break.
Holdup Time: 21 milliseconds minimum (from loss of AC input)
VME: System designed to support the VME standard C.1
Product Description: The 100 Watt Power Supply Module is a rack-mounted unit that
plugs directly into a 48-pin backplanemounted connector in the
leftmost slot in the rack. It provides +5 volt, +12 volt and -12
volt power, and logic level sequencing signals to the backplane.
Related Product Recommendation:
| GE | VCIB-16A | GE | DS200CDBAG1ACA |
| GE | VMIVME-7671-421000 | GE | DS200DCFBG2BNC |
| GE | 269PLUS-100P-120 | GE | DS200FCRRG1AKD |
| GE | 369-HI-0-0-0-0 | GE | DS200LDCCH1ARA |
| GE | 369-HI-R-0-0-0 | GE | DS200LRPAG1AGF |
| GE | 531X111PSHAPG3 | GE | DS200PCCAG5ACB |
| GE | 531X113PSFARG1 | GE | DS200PCCAG9ACB |
| GE | 531X123PCHACG1 | GE | IC693DSM302 |
| GE | 531X139APMARM7 | GE | IC693MDL330 |
| GE | 531X303MCPBCG1 | GE | IC693MDL646 |
| GE | 531X305NTBACG1 | GE | IC693MDL655 |
| GE | 531X305NTBAPG1 | GE | IC693MDL730 |
| GE | IC200ALG322 | GE | IC693MDL752 |
| GE | IC200ALG620 | GE | IC693PBS105 |
| GE | IC200ALG630 | GE | IC693PCM301 |
| GE | IC200CHS002 | GE | IC200MDL742 |
| GE | IC200MDL740 | GE | IC200CPUE05 |
| GE | IC3600LTGA | GE | IC200PWR101 |
| GE | IC3600TUAA1 | GE | IC200PWR001 |
| GE | IC660BBD025 | GE | IC693PWR330 |
| GE | IC670MDL640 | GE | IC694APU300 |
| GE | IC670PBI001 | GE | IC694BEM331 |
| GE | IC693ACC310 | GE | IC694MDL645 |
| GE | IC693ALG223 | GE | IC694MDL655 |
| GE | IC693ALG390 | GE | IC694MDL740 |
The use of the product:
1.electricity,
2.oil and gas,
3. petrochemical,
We ships worldwide and accepts T/T and Paypal.
All items are subject to availability and passing our QA testing
and inspection.
Turnaround Time:
Standard order processing is 1-2 business days plus shipping method
chosen.
Rush and off-hours service available for an additional fee
Packaging and Handling:
Items are safely packaged in custom shipping cartons for
protection.
Shipping:
We ship worldwid use UPS, FedEx, DHL, or Truck Freight when needed.
Call to use a shipping service other than the ones listed.
International Customers are responsible for all Customs fees, VAT,
and other fees applied by their
respective countries.
All shipments are fully insured.
Our advantage Products:
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【Yokogawa】Pressure Transmitter
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
(Modicon,SMC,SICK,NORGREN,Siemens etc.)
