GE FANUC IC693CPU351 TYPICAL SCAN RATE OF 0.22 MS PER 1K OF LOGIC
Technical Specifications for IC693CPU351
Brand GE Fanuc
Series Series 90-30
Manufacturer GE Fanuc
Part Number IC693CPU351
Product Description Modular CPU
Product type CPU module
User memory 240 Kbytes
Processor type 80386EX
Compatibility GE Fanuc 90-30 PLCs
Clock speed 25 Megahertz
Typical scan rate 0.22 ms per 1K of Boolean logic
Serial ports 3
Processor speeds 25 MHz
Voltage input 5 Volts DC
Expandable Yes
Current input 890 milliamps
No. of extension baseplates Seven (7) expansion baseplate; Seven
(7) Remote I/O baseplate
Operating temperature 0 to 60 degrees Celsius
Discrete Input Points - %I 2048
Key switch Yes
Discrete Output Points - %Q 2048
Analog Inputs - %AI 32,640 (max)
Analog Outputs - %AQ 32,640 (max)
Built-in Serial Ports PLC power supply Port: Supports SNP slave and
SNP-X slave protocols; Port 1 and 2: RTU slave,
SNP/SNPX master/slave
Timers / Counters >2000
Interrupts No
Shift register Yes
Current load: 890 mA
Bus voltage: +5VDC
About IC693CPU351
The GE Fanuc 90-30 module with catalog number IC693CPU351 is part
of the modular CPU sub-category.
This CPU is designed for applications that require higher
complexity, faster processing speed and support for
large quantity of I/O. This module is a single-slot CPU module that
is designed to be mounted to a 5-slot or
10-slot CPU baseplate.
The IC693CPU351 supports a large quantity of I/O specifically, 2048
Discrete Input points (%I); 2048 Discrete
output points (%Q) and analog I/O words that varies depending on
the software used however, the maximum
configurable analog I/O is 32, 640 Words, each. Other internal
register quantities available to this CPU are 1280
bits of binary global memory; 4096 bits of memory coils; 256 bits
of temporary output coils; 128 bits of system
status references; maximum of 32640 words of register memory and
28000 Words of system registers which
can be used for reference table viewing only.
This modular CPU is configurable to communicate and perform I/O
data exchange between I/O expansion or
Remote I/O baseplates. Specifically, Seven (7) and / or I/O
expansion or remote I.O baseplates. For communication
with visualization systems such as Human Machine Interface (HMI) or
Supervisory Control and Data
Acquisition System (SCADA) and other automation devices, the
IC693CPU351 is provided with Three (3) Serial ports.
One (1) serial port is located on the power supply connectors
supporting SNP/SNPX slave while Ports 1 and 2 supports
RTU slave, SNP / SNPX master/slave protocols. Installation of
communication modules is also supported by this modular CPU.
The GE Fanuc IC693CPU351 CPU is a modular CPU module. The
IC693CPU351 CPU is developed for use in Series 90-30
programmable logic controller (PLC) systems. The clock speed of the
CPU is 25 Megahertz. The processor type is an 80386EX
processor. The IC693CPU351 CPU is part of the GE350 to 364 CPU
series which were developed to meet needs of customers
that required faster processing speed, increased memory size. The
IC693CPU351 CPU is supported by the Logicmaster 90- 30,
microprogramming and configuration software that is release version
6.0 and later and the control programming and
configuration software that is release version 2.0 and later. The
user memory on the IC693CPU351 CPU is 240 KB
(supported by the CPU firmware that is release 9.0 and later). For
firmware prior to release 9.0, the CPU module memory size
is 80 KB.
The IC693CPU351 CPU does not support an embedded Ethernet port but
there are 3 built-in serial ports on the CPU module.
Optional communications modules available for the IC693CPU351 CPU
include the Profibus, GBC, Ethernet, GCM and
GCM+ modules. Floating-point math functions are supported by the
IC693CPU351 CPU. A key switch is also provided on the
IC693CPU351 CPU. A sequential event recorder is also available on
the module. The internal coils on the module are rated at
4096 bits and the output (temporary) coils are rated at 256 bits.
The power requirements of the IC693CPU351 CPU is 5 Volts
DC voltage and 890 milliamps of current. A battery-backed clock and
override are available on the IC693CPU351 CPU. The
operating temperature range is 32 to 140 degrees Fahrenheit.
