GE FANUCIC693ALG220 LITHIUM BATTERY SERIES 90-30 PLCS CAPACITY OF
1200 MAH
Technical Specifications for IC693ALG220
Brand GE Fanuc
Series Series 90-30
Manufacturer GE Fanuc (Former); Emerson Automation (Current)
Manufacturer GE Fanuc
Part Number IC693ALG220
Part Number IC693ALG220
Series Series 90-30
Input signals: +/-10 VDC
Module Type Input Module
Product Description Analog input module
Number of Inputs 4
Converter Resolution: 12-bit
No of Channels Four (4)
Product Type channel analog voltage module
Input signals -10 to +10 VDC
Digital resolution 5 mV/20 µA, (1 LSB = 5 mV)
Digital Resolution 12 bits, typical
Absolute Accuracy Typical: +/-10 mV/40 µA Maximum is +/-30 mV/160
µA
Compatible Components PLCs
Power consumption 27 mA from +5 volt bus on the backplane; 98 mA
from the isolated +24 volt backplane bus
Analog resolution 5 mV/20 µA, (1 LSB = 5 mV)
Voltage Range â10 to +10 Volts
Linearity < 1 Least Significant Bit
Isolation 1500 VAC
Mounting Location I/O slot of Series 90-30 Baseplate
Update Rate 4 ms
Cross-Channel Rejection > 80 db
Calibration Factory Calibrated
Input Filter Response 17 Hz
Absolute Accuracy Typical: ±10 mV/40 µA over operating temperature;
Maximum: ±30 mV/160 µA over operating temperature.
Input Filter Response 17 Hz
Bus Current draw 27 mA from +5 volt bus on the backplane; 98 mA
from the isolated +24 volt backplane bus
Product Lifecycle Status Discontinued/Obsolete
About IC693ALG220
The IC693ALG220 is a Series 90-30 module that is formerly
manufactured by GE Fanuc, currently under Emerson Automation. This
module mainly functions as analog input module, compatible with
input signal range of - 10 VDC to + 10 VDC. This module is
optionally compatible with 0-20 mA signals which can be enabled by
installing a 250 Ohm to the module’s user terminal connector.
The IC693ALG220 is installed with Analog to Digital Converter (ADC)
with conversion resolution of 12 bits for voltage input; 10 bits
for current input which can be increased to 11 bit with the use of
a precision resistor. Each channel of the module has individual
update rate of 4 ms while the module is powered by the 24VDC
provided by the PLC power supply. It has a backplane current
consumption of 27 mA from +5 volt bus on the backplane and 98 mA
from the isolated +24 volt backplane bus. It is mounted to any
available I/O slot of the 5 or 10 slot Series 90-30 baseplate and
occupies a single slot of the rack.
The IC693ALG220 has typical absolute accuracy of +/-10 mV/40 µA
while the maximum is +/-30 mV/160 µA over operating temperature. It
has linearity of # 1 Least Significant Bit (LSB), input filter
response of 17 Hz, module isolation of 1500 volts between field
side and logic side, cross channel rejection of > 80 db and
input impedance of > 9 Megohms in voltage mode and 250 ohms when
operating at current mode.
The IC693ALG220 module is an analog input module by GE Fanuc, which
is part of the Series 90-30. This input module, which is a
component of programmable logic controller (PLC), comes with 4
input channels. Each channel can easily convert an analog signal to
a digital signal, according to the user application requirements.
Additionally, the GE Fanuc IC693ALG220 CAV input module allows the
users to convert input signals ranging from -10 to +10 Volts. The
conversion speed for every channel is around 1 millisecond. Thus,
the IC693ALG220 input module provides an update rate for around 4
milliseconds for any channel at a time. The converted signal has
resolution of 12 bits binary.
The GE Fanuc IC693ALG220 input module comes equipped with a limited
current input mode, as well as a jumper on each channel’s user
terminal connector. Users can use the jumper to connect an internal
250 ohm shunt resistor to the circuit. This shunt resister allows
for an input range of -40 to +40 milliamps. However, it is
essential for the users to monitor the input current constantly to
prevent the input resistor from self-heating, because this could
affect the current accuracy negatively. The main power supply of
the GE Fanuc IC693ALG220 CAV input module is an isolated +24 Volts
DC power supply, which is supplied through a PLC power supply. The
voltage is sent through a regulator/inverter to produce the
required voltage for the IC693ALG220 module to operate. The
IC693ALG220 input module comes with an LED which shows the users
its operation status.
OTHER SUPERIOR PRODUCTS of Wisdomlong Technology CO.,LTD
| Yasakawa Motor, Driver SG- |
| Mitsubishi Motor HC-,HA- |
| Westinghouse Modules 1C-,5X- |
| Emerson VE-,KJ- |
| Honeywell TC-,TK- |
| GE Modules IC - |
| Yokogawa transmitter EJA- |
Our brands of Wisdomlong Technology CO.,LTD
Terms
1. We ships worldwide and accepts T/T and Paypal.
2. All items are subject to availability and passing our QA testing
and inspection.
3. Turnaround Time:
Standard order processing is 1-2 business days plus shipping method
chosen.
Rush and off-hours service available for an additional fee.
4. Packaging and Handling:
Items are safely packaged in custom shipping cartons for
protection.
Shipping
1. We ship worldwid use UPS, FedEx, DHL, or Truck when needed.
2. Call to use a shipping service other than the ones listed.
3. International Customers are responsible for all Customs fees,
VAT, and other fees applied by their respective countries.
FAQ
1. Why choose us?
* Passionate, experienced and highly-educated R & D and sales team;
* Reasonable price and reliable products, skillful and careful
assembly;
* Strict quality assurance and quick aftersales service;
* Lifetime technical support, can come with customized setting.
2. How about your product warranty?
* We offer one-year warranty upon delivery.
3. How about the aftersales support?
* We will offer on-time response for online enquiries from oversea
users. Please feel free contact us by email, WhatsApp, WeChat and
SKYPE.
Conact Person:
Lumi
Phone:+86-14775061220
WhatsApp:+86-14775061220
Wechat:forever_12-20_
Tel: +86-755-25020661
Fax: +86-755-25020662
WISDOMLONG TECHNOLOGY CO.,LIMITED
Email: weitianlong23e@163.com
Address: 23E BlockB,Lushan Building,Chunfeng Road,Luohu
District,Shenzhen,518001,China
