The IC693MDL730 is a Positive logic output module from the Series
90-30 Programmable Logic Controller (PLC) product family of GE
Fanuc,
now under Emerson Automation. This module features Eight (8)
discrete output channels in a single group, delivering an output
voltage range
of 12-24 VDC with + 20%, -15% ripple. Each channel delivers an
output current of 2 Amperes per point; 2 Amperes per fuse at 60
Degree
Celsius; 4 Amperes per fuse at 50 Degree Celsius. The IC693MDL730
comes with isolation between the field side and logic side
amounting to
1500 Volts. Output channels have an inrush current rating of 9.4
Amperes for 10 ms; maximum output voltage drop of 12 Volts; maximum
off-state leakage current of 1 mA along with a typical On and off
response time of 2ms for each transition. This module occupies a
single slot of
the 90-30 baseplate and is compatible with any I/O slot of a Series
90-30 Five (5) or Ten (10) slot baseplate. It has a current draw of
55 mA
when all outputs are energized, sourced from the 5 VDC bus residing
on the backplane. The IC693MDL730 is compatible for use with a
variety
of electrical loads particularly motor starters, solenoids, and
indicators. An external power supply must be wired to the module to
provide
operational power. Status LED indicators are installed to the
module’s front panel which includes blown fuse indicator, module
fault indicator,
and Eight (8) channel indicators, individually assigned to each
output channel depicting the operational state of each output
point. This module
comes with a removal terminal board for simplified maintenance.
The IC693MDL730 PLC module comes with a 12 to 24 Volts DC voltage
rating with positive logic and 2 Amps of output current. The
component
features DC power and it comes with 8 points. The unit features 2
Amps of load current per point while the response time is rated as
2
milliseconds ON and 2 milliseconds OFF. The output type is
transistor output and the module comes with positive polarity. The
connector type is
a terminal block with 20 screws that are included with the module.
