GE FANUC IC693CPU374 TYPICAL SCAN RATE SERIES 90-30 PROCESSOR MODULE
Technical Specifications for IC693CPU374
Processor model Embedded 586
Type of Memory Storage RAM and Flash
Typical Scan Rate 0.15 milliseconds per 1K of logic (boolean
contacts)
CPU type Single slot CPU module with embedded Ethernet Interface
Storage temperature -40 to 85 degrees Celsius (-40 to 185 degrees
Fahrenheit)
Operating temperature 0 to 60 degrees Celsius (32 to 140 degrees
Fahrenheit)
Number of Ethernet ports 2
Serial port RS-485 (via power supply
Brand GE Fanuc
Floating point math Yes
Power requirements 7.4 Watts at 5 Volts DC
Register memory 240 kilobytes
Processor speed 133 Megahertz
Number of I/O points 2048
Part Number IC693CPU374
Series Series 90-30
Processor type AMD SC520
About IC693CPU374
The IC693CPU374 is a GE Fanuc Programmable Logic Controller (PLC)
module from the 90-30 series. This
module is a processor module that is used to host the user program,
execute the logic and managed data
exchanges to and from the processor via the embedded communication
ports.
The IC693CPU374 may also be referred to as a controller. This
controller has built-in microprocessor with
embedded 586 processor with processing speed of 133 MHz. It has a
typical scan rate of 0.15 miliseconds per
1K Boolean contact logic. This controller module has a single slot
width that is installed to the 90-30 PLC rack.
The IC693CPU374 has a user memory of 240KB. It has Two (2) Ethernet
communication ports that supports
transmission speed of 10/100 Mbps with auto-sensing capability.
These ports enable the controller to be
connected to an Ethernet network for communication with programming
workstations such as desktop or laptop
computers, communication with Human Machine Interface (HMI) and
Supervisory Control and Data Acquisition
(SCADA) systems as well as other processors for messaging
functions. This controller may also be
communicated through the RS485 communication interfaces that can be
found on the power supply whether
standard or high-capacity power supply.
This controller accepts user program that is developed using a
variety of programming software applications
such as VersaPro 2.03 or later, CIMPLICITY Machine Edition Logic
Developer 2.60 or later and Control software
version 2.50 or later. When performing online edit to a controller
with existing user program, utilize the same
software with equal or higher version.
The IC693CPU374 CPU features a processor speed of 133 Megahertz and
a total user memory of 240 KB. The
program memory can be configured according to the application
requirements and it includes a register memory that is configurable
within a range of 128 to 32,640 words, and a configurable memory
for analog inputs and analog outputs. The
memory for system registers supports up to 28 words and the users
can set up around 2000 timers and
counters.
The IC693CPU374 CPU features the 80386EX processor of the AMD SC520
type and it has 2 built-in Ethernet
ports that allow 10/100 base-T/TX communication. The featured
Ethernet ports are connected through RJ-45
connectors. The unit also supports an RS-485 port on the power
supply and it allows for communication through
the SNP and SNPX protocols. In addition to that, the unit supports
several program storage devices that are
often used.
