GE FANUC SERIES 90-30 PLC Digital I/O Module IC697ACC621 FACTORY
SEALED
The IC697ACC621 fan assemply is a rack fan assembly that has been
introduced as an accessory into the Series 90-70 product line of
PLCs by GE Fanuc Automation. This assembly is used to provide
additional cooling to different racks within the series, especially
to their connections and electronic parts. Overheating is one of
the main causes of sudden stops during operation and of causing
problems in systems that end up causing the damaged parts to need
to be repaired or replaced. This rack fan assembly is meant to be
attached to racks that are installed in places with little
ventilation and that tend to become overheated. The GE Fanuc
Automation IC697ACC621 rack fan assembly operates with a voltage of
120 Volts AC and an input power of 15 to 20 Watts for each fan at
the same voltage.
Technical Specifications for IC697ACC621
| Brand | GE Fanuc |
| Series | Series 90-70 |
| Part Number | IC697ACC621 |
| Type | Rack fan assembly |
| Fan | Two |
| Voltage | 120 Volts AC |
| Frequency | 50-60 Hertz |
| Input power | 15-20 Watts per fan |
| Line Amps | 0.24-0.34 Amps per fan |
| Operating temperature | -28 to 70 degrees Celsius |
| Weight | 4 pounds |
| Filter | Polyurethane Foam, 30 PPI |
| Retainer | UL94V-0 Plastic |
| Compatibility | 5-slot series 90-70 racks and the 9-slots RX7i racks |
About IC697ACC621
The IC697ACC621 fan assemply is a rack fan assembly that has been
introduced as an accessory into the Series 90-70 product line of
PLCs by GE Fanuc Automation. This assembly is used to provide
additional cooling to different racks within the series, especially
to their connections and electronic parts. Overheating is one of
the main causes of sudden stops during operation and of causing
problems in systems that end up causing the damaged parts to need
to be repaired or replaced. This rack fan assembly is meant to be
attached to racks that are installed in places with little
ventilation and that tend to become overheated. The GE Fanuc
Automation IC697ACC621 rack fan assembly operates with a voltage of
120 Volts AC and an input power of 15 to 20 Watts for each fan at
the same voltage.
The GE Fanuc Automation IC697ACC621 rack fan assembly is compatible
with the 9-slot RX7i racks and with the 5-slot Series 90-70 racks.
This assembly has a locked rotor current range of 0.24 to 0.34 Amps
and it only weighs 4 pounds. This assembly includes 2 fans. The GE
Fanuc Automation IC697ACC621 rack fan assembly comes with a
polyurethane foam filter that is designed with 30 pores per square
inch and a plastic UL94V-0 retainer and guard. The fan assembly has
a low noise level when it operates and it uses ball bearings to
achieve an extended operating life. The operating temperature range
goes from 028 to 70 degrees Celsius. It is recommended to install
this equipment in a clean place so that the filter will not become
clogged.
Product Description:
GE Fanuc Discrete input module for 90 - 30 series PLC offers 16
input points with one common power input terminal. It requires an
AC power source for convenient operation. Module has LED indicators
at the top to offer ON/OFF status of each point. Module has circuit
wiring information on the surface towards the inside and circuit
identification information on the outside surface. Module has a
voltage rating of 120 VAC at 50/60 Hz, 0 - 132 VAC at 50/60 Hz,
input current rating of 12 milli-Amps and a power rating of 90
milli-Amps at 5 VDC. It has a maximum ON response time of 30
milli-seconds and maximum OFF response time of 45 milli-seconds.
Module is compatible with input devices such as pushbuttons, limit
switches and electronic proximity switches. Input/output module
provides the interface between the PLC and external input devices
such as proximity sensors, push buttons, switches and BCD
thumbwheels. It supports different voltage ranges, types, current
capacity, isolation and response time to meet your application.
Product Details:
Input modules provide the interface between the PLC and external
input devices such as proximity sensors, push buttons, switches and
BCD thumbwheels. Output modules provide the interface between the
PLC and external output devices such as contactors, interposing
relays, BCD displays and indicator lamps. This module requires an
AC power source, it cannot be used with a DC power source.
Quick Details:
- FANUC
- GE FANUC
- IC697ACC621
- 115VAC FAN TRAY TO BE USED WITH SERIES 90-70 OR RX7I SHORT RACKS.
- AVAILABLE
Related Product Recommendation:
| GE | VCIB-16A | GE | DS200CDBAG1ACA |
| GE | VMIVME-7671-421000 | GE | DS200DCFBG2BNC |
| GE | 269PLUS-100P-120 | GE | DS200FCRRG1AKD |
| GE | 369-HI-0-0-0-0 | GE | DS200LDCCH1ARA |
| GE | 369-HI-R-0-0-0 | GE | DS200LRPAG1AGF |
| GE | 531X111PSHAPG3 | GE | DS200PCCAG5ACB |
| GE | 531X113PSFARG1 | GE | DS200PCCAG9ACB |
| GE | 531X123PCHACG1 | GE | IC693DSM302 |
| GE | 531X139APMARM7 | GE | IC693MDL330 |
| GE | 531X303MCPBCG1 | GE | IC693MDL646 |
| GE | 531X305NTBACG1 | GE | IC693MDL655 |
| GE | 531X305NTBAPG1 | GE | IC693MDL730 |
| GE | IC200ALG322 | GE | IC693MDL752 |
| GE | IC200ALG620 | GE | IC693PBS105 |
| GE | IC200ALG630 | GE | IC693PCM301 |
| GE | IC200CHS002 | GE | IC200MDL742 |
| GE | IC200MDL740 | GE | IC200CPUE05 |
| GE | IC3600LTGA | GE | IC200PWR101 |
| GE | IC3600TUAA1 | GE | IC200PWR001 |
| GE | IC660BBD025 | GE | IC693PWR330 |
| GE | IC670MDL640 | GE | IC694APU300 |
| GE | IC670PBI001 | GE | IC694BEM331 |
| GE | IC693ACC310 | GE | IC694MDL645 |
| GE | IC693ALG223 | GE | IC694MDL655 |
| GE | IC693ALG390 | GE | IC694MDL740 |
The use of the product:
1.electricity,
2.oil and gas,
3. petrochemical,
Our advantage Products:
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【Yokogawa】Pressure Transmitter
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
(Modicon,SMC,SICK,NORGREN,Siemens etc.)
