MCDLN35SE Industrial Servo Drives 3phase 200 V 750W Panasonic
Description of Industrial Servo Drives MCDLN35SE
Manufacturer : Panasonic
Product no. : MCDLN35SE
Product type : Servo Driver
Operating temperature : 0°C ~ 55°C
Mounting type : Chassis
Type : Module
Interface : RS-232, RS-485, USB
Voltage supply : 200VAC
Current output : 22A
Voltage load : 200 V
Motor type : ServoControl / Drive
Type : Servo AC
Number of motors : 1Wattage
Load : 750W
Spec Detail of MCDLN35SE Industrial Servo Drives
| Item | Specifications |
|---|
| Part Number | MCDLN35SE |
| Details | A6SE series
Position control type (Incremental system only, Pulse train only)
without the safety function |
| Family Name | MINAS A6 |
| Series | A6SE series |
| Type | Position control type |
| Frame | C-Frame |
| Frequency response (kHz) | 3.2 |
| Control method | Position control |
| About control method | A6SE series driver (Position control only) does not correspond to
the absolute system of using the serial communication with the host
device. It supports incremental system only. |
| Safety Function | without |
| Supply voltage | Single/3-phase 200 V |
| I/F Classification of type | Pulse train only |
| Dimensions (W) (Unit: mm) | 65 |
| Dimensions (H) (Unit: mm) | 150 |
| Dimensions (D) (Unit: mm) | 170 |
| Mass (kg) | 1.6 |
| Environment | For more details, please refer to the instruction manual. |
Basic Specifications
| Item | Specifications |
|---|
| Input power: Main circuit | Single/3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Input power: Control circuit | Single phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Encoder feedback | 23-bit (8388608 resolution) absolute encoder, 7-wire serial |
| About Encoder feedback | * Since it can be used only as an incremental system, do not
connect the battery for absolute encoder. Parameter Pr. 0.15 must
be set to "1" (factory settings). |
Parallel I/O connector:
Control signal Input | General purpose 10 inputs
The function of general-purpose input is selected by parameters. |
Parallel I/O connector:
Control signal Output | General purpose 6 output
The function of general-purpose output is selected by parameters. |
Parallel I/O connector:
Analog signal Output | 2 outputs (Analog monitor: 2 output) |
Parallel I/O connector:
Pulse signal Input | 2 inputs (Photo-coupler input, Line receiver input) |
Parallel I/O connector:
Pulse signal Output | 4 outputs (Line driver: 3 output, open collector: 1 output) |
| Communication function | USB |
| Communication function: USB | USB interface to connect to computers for parameter setting or
status monitoring. |
| Regeneration | Built-in regenerative resistor (external resistor is also enabled.) |
| Control mode | Switching among the following 3 mode is enabled,
(1) Position control, (2) Internal velocity command, (3)
Position/Internal velocity command |
Warranty
We offer 1 year warranty for this product. If the product is out of
working order under proper usage per
instructions manual within the warranty period, please contact us
to obtain a merchandise return code and
shipping instruction. Then, send it back at your shipping costs.
After receiving your return item, it will take 7 days for
evaluation and investigation. A brand new
replacement unit will be sent to you at our shipping costs if it
meets our warranty requirements.
Payment
Credit card on line is available.We also accept payment by T/T and
Western Union.
This item have stock,so can delivery to you within 3 business days
after your payment cleared.If ther
is any import duties or taxes,it is the buyer's responsibility.
Wisdomlong Technology CO.,LTD Featured Products:
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
