Omron R7D-APA3H SERVO DRIVER 30W PULSE INPUT 240 VAC SINGLE-PHASE
0.42A 200V Load
Product information OMRON R7D-APA3H :
- - Power supply units 200/230 V (170 to 253 V) 50/60 Hz.
- Fully digital control. MLI output.
- Control by pulse train 250 kHz max. Line driver input or open
collector.
- Power circuit power supplies and separate control circuit.
- RS232 and RS422A interfaces
- Configuration and implementation simplified by DIP switches.
- Software and programming console for all maintenance and
monitoring operations.
- Servomotors from 30 to 750 W, from 0.095 to 2.39 Nm, 3000 rpm
(4500 rpm), IP55.
- Incremental encoder 2000 points per revolution.
- Standard motor (low inertia) from 30 to 750 W.
- Short motor from 100 to 750 W.
- Motor with or without brake: brake due to lack of current 24
V.C.C.
- Simple and economical drives and servomotors.
- 200V single phase drives.
- Motor 30 to 750 W 3000 rpm nominal (4500 rpm max.).
- Engine with or without brake from 0.095 to 2.39 Nm.
- Standard motor and short engine.
- Simplified setting
- CE, UL and cUL compliant.
• Compact AC Servo Drives The footprint of the compact AC Servo
Drives is only 48% that of the SMARTSTEP A Series, and the volume
is only 39%. The AC Servo Drives of the SMARTSTEP 2 Series are also
equipped with new functions and higher performance for more
accurate positioning.
• Vibration Suppressed during Acceleration/Deceleration of
Low-rigidity Mechanisms Damping control suppresses vibration when
using the SMARTSTEP 2 for low-rigidity mechanisms or devices in
which the end vibrates.
• Resonance Control for High-speed Positioning Realtime autotuning
estimates the load inertia of the machine in realtime and
automatically and constantly sets the optimal gain. The adaptive
filter automatically suppresses vibration caused by resonance.
• Compatible with 90° Phase Difference Input Command Pulses In
addition to conventional CW/CCW inputs (2 pulses) and SIGN/PULS
inputs (1 pulse), the SMARTSTEP 2 supports 90° phase difference
inputs. This makes it possible to input encoder output signals
directly into the Servo Drive for simplified synchronization
control.
Same series of R88 - :
R88D-GN04H-ML2 : G-Series servo drive, 1~ 200 VAC, MECHATROLINK II integrated, 400 W
R88M-G40030H-BS2 : G-Series/SmartStep 2 AC servo motor (cylinder type), 400 W, 200
VAC, 3000 rpm, 1.3 Nm, with brake
R88M-G40030H-BS2-D: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, incremental,
Brake, with circular connector
R88M-G40030T-BS2: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, absolute, Brake
R88M-G40030T-BS2-D: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, absolute, Brake,
with circular connector
R88M-GP40030T-BS2-D: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, absolute, Brake,
with circular connector
Details:
Similar Model Products:
| Specifications | Model |
|---|
| Single-phase 100 VAC | 50 W | R7D-BPA5L |
| 100 W | R7D-BP01L |
| 200 W | R7D-BP02L |
| Single-phase/three-phase 200 VAC | 50 W | R7D-BP01H |
| 100 W |
| 400 W | R7D-BP04H |
| Single-phase 200 VAC | 200 W | R7D-BP02HH |
| Three-phase 200 VAC | 200 W | R7D-BP02H |
| Item | Specifications |
|---|
Ambient operating temperature
Ambient operating humidity | 0 to 55 °C, 90% max. (with no condensation) |
|---|
Ambient storage temperature
Ambient storage humidity | -20 to 65 °C, 90% max. (with no condensation) |
|---|
| Storage and operating atmosphere | No corrosive gasses, no dust, no iron dust, no exposure to moisture
or
cutting oil |
|---|
| Vibration resistance | 10 to 60 Hz; acceleration: 5.9 m/s2 (0.6 G) max. |
|---|
| Impact resistance | Acceleration of 19.6 m/s2 max. 3 times each in X, Y, and Z directions. |
|---|
| Insulation resistance | Between power supply/power line terminals and frame ground: 0.5 MΩ.
min. (at 500 VDC) |
|---|
| Dielectric strength | Between power supply/power line terminals and frame ground: 1,500
VAC for 1 min at 50/60 Hz
Between each control signal and frame ground: 500 VAC for 1 min |
|---|
| Altitude | 1,000 m above sea level max. (860 hp min.) |
|---|
| Degree of protection | Built into panel (IP10). |
|---|
International
standards | EC
Directives | EMC Directive | EN 55011 class A group 1
EN 61000-6-2 |
|---|
Low Voltage
Directive | EN 50178 |
|---|
| UL standards | UL 508C |
|---|
| cUL standards | cUL C22.2 No.14 |
|---|
Korean Radio Regulations
(KC) | Certified |
|---|
| Specifications | Model |
|---|
| Power Model Supply Voltage | Applicable Servomotor Capacity |
|---|
Single-phase
100 VAC | 50 W | R88D-KTA5L |
|---|
| 100 W | R88D-KT01L |
|---|
| 200 W | R88D-KT02L |
|---|
| 400 W | R88D-KT04L |
|---|
Single-phase/three-phase
200 VAC | 100 W | R88D-KT01H |
|---|
| 200 W | R88D-KT02H |
|---|
| 400 W | R88D-KT04H |
|---|
| 750 W | R88D-KT08H |
|---|
| 1 kW | R88D-KT10H |
|---|
| 1.5 kW | R88D-KT15H |
|---|
Three-phase
200 VAC | 2 kW | R88D-KT20H |
|---|
| 3 kW | R88D-KT30H |
|---|
| 5 kW | R88D-KT50H |
|---|
| 7.5 kW | R88D-KT75H |
|---|
| 15 kW | R88D-KT150H |
|---|
Three-phase
400 VAC | 600 W | R88D-KT06F |
|---|
| 1 kW | R88D-KT10F |
|---|
| 1.5 kW | R88D-KT15F |
|---|
| 2 kW | R88D-KT20F |
|---|
| 3 kW | R88D-KT30F |
|---|
| 5 kW | R88D-KT50F |
|---|
| 7.5 kW | R88D-KT75F |
|---|
| 15 kW | R88D-KT150F |
|---|
Our brand:
【Honeywell】 Module DCS/PLC/Transmitter
【Emerson/Delta V】 Module/ CT Motor & Drives
【ABB】 I/O Module
【AB】 Module&Touch Screen
【Rosemount】 Transmitter
【Yokogawa】 Transmitter
【Yaskawa】 Servo Drive&Servo Motor
【GE/Fanuc】 IC69 Series PLC
【Mitsubishi】 Servo Drive&Servo Motor
(Modicon,SMC,SICK,NORGREN,Siemens,Ebmpapst etc.)
Order Process:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming
the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T.
When we received the payment, then we will start to prepare the
order for you asap.
3, We can according to your shipment to ship out the goods, Or we
also can help you to ship out the goods directly. And the tracking
number will send you by the next day.
4., Usually for our inventory goods only need to take about 3-5
days.
5. If you also have any questions, you can ask me any time, right
below is my contact.
FAQ
* Q: Do you provide a warranty for the goods?A: Yes, we provide a warranty for all the goods from us.
* Q: Could Wisdomlong provide technology support?
A: We're in this field for more than 8 years. If there's any
problem, please contact with us, we'll provide a suggestion from
our
engineer to help you solve the problem.
* Q: Does Wisdomlong keep goods in stock or only trading?
A: We have a large warehouse for goods. Keep lots of goods in the
warehouse, so could promise a fast delivery.
* Q: What is your MOQ?
A: We provide you small MOQ for each item, it depends on your
specific order!
* Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
* Q: How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our
customers benefit ;
We respect every customer as our friend and we sincerely do
business and make friends with them, no matter where they come
from.
Send your Inquiry details in the Below, Scan "The QR Code" Now!
