OMRON R88M-GP10030L 100W100V3KRPM INC FLT G-SRVMTR Speed Control
Torque Control.
Product information OMRON R88M-GP10030L :
1. These are the values when the Servomotor is combined with a
Servo Drive at room temperature (20°C, 65%). The
maximum momentary torque shown above indicates the standard value.
2. Applicable Load Inertia:
• The operable load inertia ratio (load inertia/rotor inertia)
depends on the mechanical configuration and its rigidity.
For a machine with high rigidity, operation is possible even with
high load inertia. Select an appropriate motor and
confirm that operation is possible.
• If the dynamic brake is activated frequently with high load
inertia, the dynamic brake resistor may burn. Do not
repeatedly turn the Servomotor ON and OFF while the dynamic brake
is enabled.
• The dynamic brake is designed only for emergency stops. Design
the system so that the Servomotor remains
stopped for at least 3 minutes after applying the dynamic brake.
Otherwise the dynamic brake circuits may fail.
3. The allowable radial and thrust loads are the values determined
for a service life of 20,000 hours at normal operating
temperatures. The allowable radial loads are applied as shown in
the following diagram.
The amplitude may be amplified by mechanical resonance. Do not
exceed 80% of the specified value for extended
periods of time.
Note: 1. Do not use the cable when it is laying in oil or water.
Note: 2. Do not expose the cable outlet or connections to stress
due to bending or the weight of the cable itself.
Note: 3. Always disconnect all connections to the Servo Drive
before you perform insulation resistance tests on it. If you
perform an insulation resistance test while the Servo Drive is
connected, the Servo Drive may be damaged.
Never perform dielectric strength tests on the Servo Drive. Failure
to follow this precaution may result in
damaging internal elements.
Same series of R88 - :
R88D-GN04H-ML2 : G-Series servo drive, 1~ 200 VAC, MECHATROLINK II integrated, 400 W
R88M-G40030H-BS2 : G-Series/SmartStep 2 AC servo motor (cylinder type), 400 W, 200
VAC, 3000 rpm, 1.3 Nm, with brake
R88M-G40030H-BS2-D: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, incremental,
Brake, with circular connector
R88M-G40030T-BS2: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, absolute, Brake
R88M-G40030T-BS2-D: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, absolute, Brake,
with circular connector
R88M-GP40030T-BS2-D: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, absolute, Brake,
with circular connector
| R88M-G10030L | R88M-G20030L |
| R88M-G10030H-Z | R88M-G20030H-Z |
| R88M-G40030H-Z | R88M-G05030H-B-Z |
| R88M-G10030L-B | R88M-G20030L-B |
| R88M-G10030H-B-Z | R88M-G20030H-B-Z |
| R88M-G40030H-B-Z | R88M-G05030H-S2-Z |
| R88M-G10030L-S2 | R88M-G20030L-S2 |
| R88M-G10030H-S2-Z | R88M-G20030H-S2-Z |
| R88M-G40030H-S2-Z | R88M-G05030H-BS2-Z |
| R88M-G10030L-BS2 | R88M-G20030L-BS2 |
| R88M-G10030H-BS2-S | R88M-G20030H-BS2-Z |
| R88M-G40030H-BS2-Z | R88M-GP10030L |
| R88M-GP20030L | R88M-GP10030H-Z |
| R88M-GP20030H-Z | R88M-GP40030H-Z |
| R88M-GP10030L-B | R88M-GP20030L-B |
| R88M-GP20030L-B | R88M-GP20030H-B-Z |
| R88M-GP40030H-B-Z | R88D-GT01H-Z |
| R88D-GT02H-Z | R88D-GT04H-Z |
| R88D-GT08H-Z | R88M-GP10030L-S2 |
| R88M-GP20030L-S2 | R88M-GP10030H-S2-Z |
Details:
Our brand:
【Honeywell】 Module DCS/PLC/Transmitter
【Emerson/Delta V】 Module/ CT Motor & Drives
【ABB】 I/O Module
【AB】 Module&Touch Screen
【Rosemount】 Transmitter
【Yokogawa】 Transmitter
【Yaskawa】 Servo Drive&Servo Motor
【GE/Fanuc】 IC69 Series PLC
【Mitsubishi】 Servo Drive&Servo Motor
(Modicon,SMC,SICK,NORGREN,Siemens,Ebmpapst etc.)
Order Process:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming
the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T.
When we received the payment, then we will start to prepare the
order for you asap.
3, We can according to your shipment to ship out the goods, Or we
also can help you to ship out the goods directly. And the tracking
number will send you by the next day.
4., Usually for our inventory goods only need to take about 3-5
days.
5. If you also have any questions, you can ask me any time, right
below is my contact.
FAQ
* Q: Do you provide a warranty for the goods?A: Yes, we provide a warranty for all the goods from us.
* Q: Could Wisdomlong provide technology support?
A: We're in this field for more than 8 years. If there's any
problem, please contact with us, we'll provide a suggestion from
our
engineer to help you solve the problem.
* Q: Does Wisdomlong keep goods in stock or only trading?
A: We have a large warehouse for goods. Keep lots of goods in the
warehouse, so could promise a fast delivery.
* Q: What is your MOQ?
A: We provide you small MOQ for each item, it depends on your
specific order!
* Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
* Q: How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our
customers benefit ;
We respect every customer as our friend and we sincerely do
business and make friends with them, no matter where they come
from.
Send your Inquiry details in the Below, Scan "The QR Code" Now!
