SIMATIC S7-1500 Compact CPU CPU 1511C-1 PN, central processing unit
with work memory 175 KB for program and 1 MB for data, 16 digital
inputs, 16 digital outputs, 5 analog inputs, 2 analog outputs, 6
high-speed counters, 4 high-speed counters for PTO/PWM/frequency
output 1st interface: PROFINET IRT with 2-port switch, 60 ns bit
performance, incl. push-in front connector, SIMATIC Memory Card
required
The CPUs of theSIMATIC S7-1500T support advanced Motion Control
functions in addition to the Motion Control functions offered by
the
standard CPUs. Additional Motion Control functions are absolute
synchronous axes (synchronization with specification of synchronous
position) and the cam. For effective commissioning, diagnostics and
fast optimization of drives and controls, the SIMATIC S7-1500
controller family offers extensive trace functions for CPU tags.
Option modules in standard and intrinsically safe versions The
following option modules are available:
● Position feedback module
● Alarm module
● SIA module
● Mechanical limit switch module
● EMC filter module
● NCS sensor
● Internal NCS module
Note:
In order to dissipate glitch impulses, the positioner must be
connected to an equipotential bonding cable (earth potential) using
a low resistance. The positioner in the Makrolon enclosure is
therefore equipped with an additional cable. Connect the this cable
to the shield of the bus cable and the equipotential bonding cable
using a cable clamp.
Devices in the stainless steel or aluminum enclosure have a
corresponding terminal on the outer side of the enclosure. This
terminal must also be connected to the equipotential bonding cable.
For applications in hazardous areas, ensure an adequately suitable
equipotential bonding between the hazardous and non-hazardous
areas.
