Emerson KJ3222X1-BA1 AI 8-Channel 4-20 mA HART Series 2 Redundant
Card
Hazardous Atmosphere
Ex nA IIC Gc (4-Wire)
Ex nA [nL] IIC Gc (2-Wire)
Ex nA [ic] IIC Gc (2-Wire)
FM13ATEX0034U IECEx FMG 13.0015U
Power Specifications
LocalBus power rating : 12 VDC at 150 mA
Bussed field power rating : 24 VDC at 300 mA
Field circuit rating :24 VDC at 30 mA
Environmental Specifications
Ambient Temperature : -40 to 70o C
Shock :10g ½ Sinewave for 11 msec
Vibration :1mm Peak to Peak from 5 to 16Hz; 0.5g from 16 to 150Hz
Airborne Contaminants: ISA-S71.04 –1985 Airborne Contaminants Class
G3
Relative Humidity :5 to 95% Non-Condensing IP 20 Rating
Terminal block key position: A1
Note: Refer to the product label for serial number and location and
date of manufacture. Refer also to the wiring diagram on the left
side of the card.
Removal and Insertion
Field power supplied to this device, either at the field terminal
or as bussed field power through the carrier, must be removed
before removing or connecting the device.
This unit may be removed or inserted while system power is
energized under the following conditions: (Note Only one unit at a
time may be removed with system power energized.)
• When used with KJ1501X1-BC1 System Dual DC/DC Power Supply
operating on 24 VDC or 12 VDC input power. The primary circuit
wiring inductance for input power must be less than 23 uH, or a
certified supply with an open circuit voltage, Ui of 12.6 VDC and
an Lo of less than 23 uH (including wire inductance).
An I/O loop assessment must be completed on all energy-limited
nodes. A terminal block fuse may NOT be removed with field power
energized for non-sparking circuits.
Quick Details:
- Condition: New
- Type: 8 Point Analog HART Input Module
- Make: Fisher Rosemount Emerson
- Series: DeltaV
- Model: KJ3222X1-BA1
- Part: 12P2532Xxxx
- Packaging: Original, Sealed
- Weight: 1.0kg
Specifications:
| Ports: | 2 |
| Isolation: | Each AS-i port is optically isolated from each other and the system
and factory tested to 1500 VDC |
| Operating temperature: | -25 to 70 °C (-13 to 158 °F) |
| Storage Temperature: | -40 to 85 °C (-40 to 185 °F) |
| Airborne contaminants: | ISA-S71.04-1985 Airborne Contaminants Class G3 Conformal coating |
| Shock: | 10 g½ -sine wave for 11 ms |
| Vibration: | 1 mm peak-to-peak from 5 to 16 Hz;0.5 g from 16 to 150 Hz |
Introduction:
DeltaV™ M-series AS-I Interface Card
The DeltaV™ M-series actuator sensor interface (AS-i) is a
field-proven interface for discrete actuators
and sensors. The interface uses an automatic addressing system via
the bus connection to provide each
field device a specific tag name that identifies the device for
configuration and diagnostic purposes. The
DeltaV system auto-senses AS-i devices and provides smooth
activation of new devices. It is easy to
install, reliable and simple to use.
Buses and the DeltaV™ System
Features:
- Offers freedom to choose appropriate bus for application
- Supports standard device-level busses
- Reduces wiring costs
- Features native controller level interface
- Enables mix-and-match bus technologies to meet application
requirements
Good Service in WTL:
>We offer high quality, fast delivery, competitive price for
Emerson DeltaV.
>Please send your RFQ to get the latest price.
>We will ship the items within 3-5 working days after receive
the payment.
>We can ship to you by UPS/DHL//EMS/Fedex. Please contact us and
we will use your preferred ways.
>We have a large stock and the prices are variable, so sometimes
the prices we post are not accurate. If needed, please contact us
for specific prices.
WTL is not liable for any personal injury or property damage
resulting from the use of this equipment. It is
buyer's responsibility as to the safe handling & operation of this
equipment and to verify equipment is
compliance to their machinery.
Shopping tips:
| Product Name: | Power Supply Redundancy Module |
| Quality: | 100% tested ok |
| Origin: | UK |
| Lead time: | 3-5 days |
| Shipping Terms: | DHL,TNT,FEDEX,UPS,EMS,and ect |
| Shipping fee: | DHL 70% OFF |
| Payment Terms: | T/T or PAYPAL |
| Condition: | Both New and USED are available |
| Warranty | New with one year / Used with 6 months |
Terms & Conditions:
We ship worldwide and we accept payments via T/T or Paypal.
For more details message us.
All items are subject to availability.
If you have any questions in regards to pricing, feel free to
message us through below contact:
Our Banrds:
