The IC670ALG320 is an analog output module that is part of GE
Fanuc’s Field Control I/O series. This module is typically used for
actuating control devices such as modulating control valves,
dampers, louvers, positioners and similar devices. It may also be
used for signal retransmission for connection to panel meters,
signal isolators, signal splitters, external single and multi-loop
controllers and data loggers.
The IC670ALG320 is specifically a current and voltage sourcing
output module. It has a built-in EMI filter Analog to Digital
Converter (ADC) circuit to every channel of the module. This ADC
has conversion resolution of 12-bits, typical and linearity of 1
LSB resolution on all ranges and output signals. At 0-20 mA, the
module’s typical analog resolution is 5.0 micro Amperes and 4.0
micro Amperes at 4-20 mA range while at 0-10 VDC, the analog
resolution is 2.5 mV.
This module features a single group of outputs with isolation to
ground and logic rated 1500 VAC for 1 minute and 250 VAC,
continuous. This module requires an external power supply voltage
of 20-29 VDC with 5% maximum ripple. It has a stand-by input
current of 80 mA and operating current requirement of 180 mA. The
module’s power dissipation is minimum of 1.5 Watts and maximum of
4.3 Watt while the module’s current draw from the Bus Interface
Unit (BU) power supply is maximum of 51 mA.
For noise immunity, this module is recommended to be used with
instrumentation grade shielded twisted or 3-pair twisted wire. The
shield wire should be connected at the enclosure’s grounding bar,
nearest to the module.
The IC670ALG320 output module is an GE Fanuc analog output module.
It comes with a group of 4 current/voltage outputs. It supports a
current range between 4 and 20 milliamps and a voltage range
between 0 and 10 Volts. The current and voltage range can also be
changed by using an additional jumper on the terminal block of the
I/O. The module can be easily scaled to match different application
demands by making changes in the configuration settings. The power
supply of the module can also be used to power the bus interface
unit. It can also be used for isolated transducers and analog
inputs (isolated and differential). The IC670ALG320 output module
has an LED on the front that shows the field and backplane power
status for the module.
The IC670ALG320 output module uses 4 words for analog output data.
The output modules help to process the analog values from the host
or processor into the current output. The module provides options
for keying. For scaling, the module uses the INT unit on the HHM
configuration that responds to the actual desired output. The
isolation to ground and logic for the module is 1500 Volts AC for a
time period of 1 minute and it is 250 Volts AC for a continuous
time period. The digital resolution of the output module is 12
bits. The IC670ALG320 output module is designed with open
architecture and it should be protected from water splashes. It
should be installed in a clean place that contains no dust, dirt,
or harmful emissions.
Technical Specifications
| Brand | GE Fanuc |
| Series | Field Control |
| Manufacturer | GE Fanuc |
| Manufacturer | GE Fanuc |
| Wiring configuration | Single-ended |
| Part Number | IC670ALG330 |
| Series | Field I/O control |
| Output signal, nominal | 0-20 mA / 4-20 mA; 0-10 VDC |
| Description | Analog output module |
| Product Description | 4-Point Analog Current / Voltage Source Output Module |
| No of Channels | Four (4) Current / Voltage Source outputs |
| Analog resolution | 4.0 µA @ 4-20 mA; 50 µA @ 0-20 mA; 0-10 VDC @ 2.5 mV |
| Current | 4-20 mA |
| Output signals | 0-20 mA; 4-20 mA; 0-10 VDC; 0-12.5 VDC |
| ADC Conversion resolution | 12 bits |
| Voltage | 0-10 Volts |
| Isolation | 1500 VAC for 1 minute, 250 VAC continuous |
| External Power supply | 20-29 VDC, 5 % maximum ripple |
| Output Data | 4 words |
| Conversion time @ 1MHz clock | 60 Microseconds per channel, typical |
| Isolation to Ground and Logic | 1500 Volts AC |
| Nominal Supply voltage | 24 VDC |
| Analog resolution | 4.0 µA @ 4-20 mA; 5.0 µA @ 0-20 mA; 2.5 mV @ -10 VDC; 0-12.5 VDC @
3.125 mV |
| Current input | Stand-by: 80 mA, typical: Operating: 180 mA, maximum |
| Digital Resolution | 12 bits, typical |
| Current Drawn from BIU power supply | 51 mA, maximum |
| Linearity | 1 LSB resolution value |
| Temperature coefficient | +/-.002% of value per degree C, typical, +/-.005% of value per
degree C, maximum |
| Input Types | Isolated and Differential |
| Module Power Dissipation | 1.4 Watts, minimum; 4.3 Watts, maximum |
| Input Current: | Standby: 80 mA Operating: 180 mA (including loop current), |
| Ground to Logic Isolation | 1500 VAC for 1 minute; 250 VAC, continuous |
| Product Lifecycle Status | Discontinued/Obsolete |
| Output grouping | Single group |
| Output wiring | Single-ended |
Technical Description of IC670ALG320
The IC670ALG320 is a Field Control I/O module that is manufactured
by GE Fanuc. This module is a Current / Voltage source analog
output module featuring Four (4) analog output channels delivering
0-20 mA; 4-20 mA; 0-10 VDC and 0-12.5 VDC signals. This module
requires an external 24 VDC supply voltage with isolation to ground
and logic of 1500 VAC for 1 minute, 250 VAC continuous. This module
has digital resolution of 12 bits and analog resolution of 4.0 µA @
4-20 mA; 5.0 µA @ 0-20 mA; 2.5 mV @ -10 VDC and 0-12.5 VDC @ 3.125
mV.
Our brand:
【Honeywell】 Module DCS/PLC/Transmitter
【Emerson/Delta V】 Module/ CT Motor & Drives
【ABB】 I/O Module
【AB】 Module&Touch Screen
【Rosemount】 Transmitter
【Yokogawa】 Transmitter
【Yaskawa】 Servo Drive&Servo Motor
【GE/Fanuc】 IC69 Series PLC
【Mitsubishi】 Servo Drive&Servo Motor
(Modicon,SMC,SICK,NORGREN,Siemens,Ebmpapst etc.)
Order Process:
1, First, send us the brand, model code/pic of the nameplate, the
quantity for inquiry. Then we will send the quote to you. after
confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T.
When we received the payment, then we will start to prepare the
order for you asap.
3, We can according to your shipment to ship out the goods, Or we
also can help you to ship out the goods directly. And the tracking
number will send you by the next day.
4., Usually for our inventory goods only need to take about 3-5
days.
5. If you also have any questions, you can ask me any time, right
below is my contact.
FAQ
* Q: Do you provide a warranty for the goods?
A: Yes, we provide a warranty for all the goods from us.
* Q: Could Wisdomlong provide technology support?
A: We're in this field for more than 8 years. If there's any
problem, please contact with us, we'll provide a suggestion from
our
engineer to help you solve the problem.
* Q: Does Wisdomlong keep goods in stock or only trading?
A: We have a large warehouse for goods. Keep lots of goods in the
warehouse, so could promise a fast delivery.
* Q: What is your MOQ?
A: We provide you small MOQ for each item, it depends on your
specific order!
* Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
* Q: How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our
customers benefit ;
We respect every customer as our friend and we sincerely do
business and make friends with them, no matter where they come
from.
Send your Inquiry details in the Below, Scan "The QR Code" Now!
