ABB 3BSC610066R1 SD833 Power Supply Device, G2 Compliant
Description
The SD83x Power Supply Units are designed to meet all the
applicable electrical safety data stated by the EN 50178 harmonized
European Standard Publication and the additional safety and
function data required by EN 61131-2 and UL 508.
The secondary output circuitry is accepted for SELV or PELV
applications. They are switch-mode Power Supply Units that convert
the mains voltage to 24 volts d.c. These power supplies can be
utilized for non-redundant and redundant applications.
Redundant applications require diode voting units SS823 or SS832.
With the type SD83x series Power Supply Units, there is no
requirement for the installation of a mains filter. They provide a
soft start feature; power-on of an SD83x will not trip fuses or
earth-fault circuit breakers.
General info
| Article number | 3BSC610066R1 |
| Type | Power supply |
| Rated output current | 10 A |
| Rated output power | 240 W |
| Rated output voltage | d.c. 24 V |
| Rated input power | 447/514 VA |
| Mains/input voltage, nominal | 100-120 V a.c. 200-240 V a.c. Auto-select input |
| Applications | SELV and PELV |
| Efficiency | 91/91.6 % |
Detailed data
| Mains voltage variation allowed | 100-120 V a.c. +-10 %, 200-240 V a.c. +-10 % |
| Mains frequency | 50-60 Hz +- 6% |
| Primary peak inrush current at power on | <10 A |
| Load sharing | - |
| Supervision relay | No |
| Power Factor (at rated output power) | 0.59/0.51 |
| Heat dissipation | 24/22 W |
| Output voltage regulation at max. current | < 70 mV / <100 mV |
| Ripple (peak to peak) | < 50 mV |
| Secondary voltage holdup time at mains blackout | 46/47 ms |
| Maximum output current | 12 A At ambient temp < 45 °C |
| Maximum ambient temperature | 55 °C |
| Primary: Recommended external fuse | 10-20 A |
| Secondary: Short circuit | 14-18 A |
| Output over voltage protection | < 39 V |
Environment and certification
| CE mark | Yes |
| Electrical safety | IEC 61131-2, UL 508, EN 50178 |
| ATEX Zone 2 | No |
| IECEx Zone 2 | No |
| Hazardous Location, Class 1 Div 2 | No |
| Marine certification | DNV-GL, ABS |
| Protection rating | IP20 according to IEC 60529 |
| Corrosive atmosphere ISA-S71.04 | G2 |
| Pollution degree | Degree 2, IEC 60664-1 |
| Mechanical operating conditions | IEC 61131-2 |
| EMC | EN 61000-6-4 and EN 61000-6-2 |
| Overvoltage Categories | Over-voltage Category III (IEC/EN 60664-1) |
| Equipment class | Class 1 according to EN 50718; 3.56 |
| RoHS compliance | DIRECTIVE/2011/65/EU (EN 50581:2012) |
| WEEE compliance | DIRECTIVE/2012/19/EU |
Dimensions
| Width | 60 mm (2.36") |
| Depth | 117 mm (4.61") |
| Height | 124 mm (4.88") |
| Weight (lbs.) | 700 g (1.5 lbs.) |
| Mounting spacing W mm | 15 mm (0.59") |
| Mounting spacing H mm | 40 mm (1.57") |
Features and benefits
- Simple DIN-rail mounting
- Class I Equipment, (when connected to Protective Earth, (PE))
- Over-voltage Category III for connection to primary main
TN network - Protective separation of secondary circuit from primary circuit
- Accepted for SELV and PELV applications
- The output of the units is protected against over current
(current limit) and over voltage (OVP)
FAQ:
Q: What is the brand name of the product?
A: The brand name of the product is ABB.
Q: What is the model number of the product?
A: The model number of the product is SD833 3BSC610066R1.
Q: Where is the product manufactured?
A: The product is manufactured in FI.
Q: What are the available payment terms?
A: The available payment terms are T/T, Western Union, and
PAYONEER.
Q: What is the delivery time for the product?
A: The delivery time for the product is 3-5 days.
Wisdomlong Technology CO.,LTD Featured Products:
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
