ABB 3BSE028926R1 Incremental Pulse Counter Module DP840
Product Details:
This document and parts thereof must not be reproduced or copied
without written permission from ABB, and the contents thereof must
not be imparted to a third party, nor used for any unauthorized
purpose.
Trademarks ABB and Relion are registered trademarks of the ABB
Group. All other brand or product names mentioned in this document
may be trademarks or registered trademarks of their respective
holders. Warranty Please inquire about the terms of warranty from
your nearest ABB representative
The data, examples and diagrams in this manual are included solely
for the concept or product description and are not to be deemed as
a statement of guaranteed properties. All persons responsible for
applying the equipment addressed in this manual must satisfy
themselves that each intended application is suitable and
acceptable, including that any applicable safety or other
operational requirements are complied with. In particular, any
risks in applications where a system failure and/or product failure
would create a risk for harm to property or persons (including but
not limited to personal injuries or death) shall be the sole
responsibility of the person or entity applying the equipment, and
those so responsible are hereby requested to ensure that all
measures are taken to exclude or mitigate such risks
This product has been designed to be connected and communicate data
and information via a network interface which should be connected
to a secure network. It is the sole responsibility of the person or
entity responsible for network administration to ensure a secure
connection to the network and to take the necessary measures (such
as, but not limited to, installation of firewalls, application of
authentication measures, encryption of data, installation of anti
virus programs, etc.) to protect the product and the network, its
system and interface included, against any kind of security
breaches, unauthorized access, interference, intrusion, leakage
and/or theft of data or information. ABB is not liable for any such
damages and/or losses.
Ordering
HS Code:
903084-- Oscilloscopes, spectrum analysers and other instruments
and apparatus for measuring or checking electrical quantities,
excluding meters of heading 90.28; instruments and apparatus for
measuring or detecting alpha, beta, gamma, X-ray, cosmic or other
ionising radiations.- Other instruments and apparatus :-- Other,
with a recording device
Detailed data
| Isolation | Groupwise isolated from ground |
| Error | Max relative error (4): PRIT = 10 ms: 300 ppm PRIT = 20 ms: 150 ppm
PRIT = 50 ms: 60 ppm PRIT = 100 ms: 30 ppm Max error in crystal
oscillator: 120 ppm + 5 ppm/year Max absolute error = rel. error +
oscillator error (PRIT = 10 ms, age < 16 year): 500 ppm (=
0.05%) |
| Current limiting | Built in current limited sensor power |
| Maximum field cable length | 200 meters (218 yards) |
| Rated insulation voltage | 50 V |
| Dielectric test voltage | 500 V a.c. |
| Power dissipation | 4 W |
| Current consumption +5 V Modulebus | 115 mA |
| Current consumption +24 V external | NAMUR = 56 + 0.5 x external load [mA] 12 V = 89 + 0.7 x external
load [mA] 24 V = 97 + external load [mA] |
Diagnostics
| Front LED’s | F(ault), R(un), W(arning), P(rimary), Channel 1-8 P(ulse) and
F(ault) |
| Supervision | Process voltage
Loop supervision |
| Status indication of supervision | Module Error, Module Warning, Channel error |
Environment and certification
| CE mark | Yes |
| Electrical safety | EN 61010-1, UL 61010-1, EN 61010-2-201, UL 61010-2-201 |
| Hazardous Location | C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2 |
| Marine certification | BV, DNV, LR |
| Temperature, Operating | 0 to +55 °C (+32 to +131 °F), approvals are issued for +5 to +55 °C |
| Temperature, Storage | -40 to +70 °C (-40 to +158 °F) |
| Pollution degree | Degree 2, IEC 60664-1 |
| Corrosion protection | ISA-S71.04: G3 |
| Relative humidity | 5 to 95 %, non-condensing |
| Max ambient temperature | 55 °C (131 °F), for vertical mounting in compact MTU 40 °C (104 °F) |
| Protection class | IP20 according to IEC 60529 |
| Mechanical operating conditions | IEC/EN 61131-2 |
| EMC | EN 61000-6-4 and EN 61000-6-2 |
| Overvoltage categories | IEC/EN 60664-1, EN 50178 |
| Equipment class | Class I according to IEC 61140; (earth protected) |
| RoHS compliance | DIRECTIVE/2011/65/EU (EN 50581:2012) |
| WEEE compliance | DIRECTIVE/2012/19/EU |
compatibility
| Use with MTU | TU810, TU812, TU814, TU818, TU830, TU833, TU842, TU843, TU844,
TU845, TU852, TU854 |
| Keying code | CF |
Features and benefits
- 8 channels
- The modules can be used in both single and redundant applications
- Interface for NAMUR, 12 V and 24 V transducer signal levels
- Each channel can be configured for pulse count or frequency
measurement
- The inputs can also be read as DI signals
- Pulse count by accumulation in a 16 bit counter
- Frequency (speed) measurement 0.5 Hz - 20 kHz
- Advanced on-board diagnostics
FAQ:
Q: What is the brand name of the product?
A: The brand name of the product is ABB.
Q: What is the model number of the product?
A: The model number of the product is DP840 3BSE028926R1.
Q: Where is the product manufactured?
A: The product is manufactured in FI.
Q: What are the available payment terms?
A: The available payment terms are T/T, Western Union, and
PAYONEER1.
Q: What is the delivery time for the product?
A: The delivery time for the product is 3-5 days.
Wisdomlong Technology CO.,LTD Featured Products:
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
