Descriptions of HC-MFS13KProtection level: IP55 does not include the shaft part and the
connector.
Features: ultra low inertia is suitable for high frequency
operation.
Application examples: the insertion device, the assembly machine.
1 axis servo amplifier.
MITSUBISHI general AC servo amplifier MELSERVO-J4 series.
Rated output: 0.4kw.
Interface: SSCNET III /H.
Power supply: three phase AC200V or single phase AC200V power
supply.
Single phase AC200V is limited to 0.75kW following servo amplifier.
Servo amplifier supporting SSCNET III /H HC-MFS053D .
Complete synchronization system capable of using high speed serial
optical communication HC-MFS053D
Can be combined with the servo system controller to maximize the
performance of the servo system.
MELSERVO-J4 grand debut.
Servo market for the star of tomorrow. World class servo products.
The new generation of MELSERVO should be what kind of? The answer
to this question is already floating
Out of the water HC-MFS053D . MELSERVO-J4, it represents the whole
digital, the original high performance based on an evolutionary.
Is also fully meet the requirements of human beings and the
environment MELSERVO latest masterpiece.
For example, the safety and environmental requirements for the
safety of human use and the safety specifications and "to Use Easy"
design.
To meet the needs of the environmental protection era of
energy-saving performance HC-MFS053D .
Beyond the performance of the evolution of MELSERVO-J4, shocking
debut!MITSUBISHI motor universal AC servo amplifier MELSERVO-J3
series.
Rated output: 15.0kw.
Interface type: general pulse interface type.
Power specification: three phase AC200V.
Pulse train and analog input as universal interface.
Can choose the position, speed and torque control mode.
The use of advanced tuning features such as advanced vibration
suppression control and adaptive filter,
Greatly improve the performance of the machine.
MR-J3, your partner.
Higher performance, more features, more convenient to use.
Highest performance in the industry.
Speed response frequency up to 2.1kHz. Servo motor series: low
inertia, medium / high power.
Rated output: 9.0kw.
Rated speed: 3000r/min.
Electromagnetic brake: No.
Shaft end specification: Standard (straight axis).
Voltage: 400V level.
Features: low inertia for high speed / acceleration and
deceleration operation occasions.
IP level: IP67.
Application example:
1, food processing machinery.
2, printing machine.
3, injection molding machine (11KW, 15KW).
4, large press machine (11KW, 15KW).
The protection level of the HF-SP/HF-JP series servo motor is IP67
(except the shaft part).
Low inertia of the power servo motor (0.5kW ~ 9kW), the maximum
speed: 6000r/min (rated speed: 3000r/min),
Suitable for high frequency positioning and acceleration /
deceleration operations, especially for food processing machines
and printing machines.
Low inertia, high power, no cooling fan servo motor (11kW and
15kW), maximum speed: 3000r/min (rated speed: 1500r/min).
The motor structure is more compact due to the adoption of the non
cooling fan design, and the connecction is reduced by using the
power source connector HC-MFS053D .
(compared with the HF-LP series servo motor with the same power,
the volume is reduced by about 46%, and the weight is reduced by
about 34%,
Suitable for high frequency positioning annd acceleration /
deceleration operations, especially for injection molding machines
and large presses HC-MFS053D .
HF-JP703 (4) /903 (4) maximum speed: 5000r/min.
Specification of HC-MFS13K
HC-KFS13K is a Motors-AC Servo produced by MitsubishiServomotor
Type HC-KFS Series;
Low inertia,small capacity,high resolution
Rated Output 0.1kW
Rated speed 3000 rpm; 200V
Electromagnetic brake none
Reduction Gear Without
Shaft type with keyway
Compliance with StandardStandard model
