Product Description of IC693CPU331
The IC693CPU331 is a modular CPU that is part of the Series 90-30
PLC of GE Fanuc Automation. This CPU is equipped with a 80188
processor with processing speed of 10 MegaHertz. It is also capable
of scanning 1K of Boolean logic in 0.4 milliseconds. This CPU has
16Kbytes user memory that is sized to accommodate 512 Discrete
input bits; 512 Discrete output bits; 128 Words of Analog input and
64 Words of analog outputs. Additionally, this CPU has internal
memory structures that is comprised of 1280 bits Discrete global
memory; 1024 bits of internal coils; 256 bits of temporary coils;
128 bits of system status references; 2048 words of register memory
and 16 Words of System registers. Additionally, there are 680 units
of Timers / Counters available to the CPU and supports Shift
register instructions. Compared to embedded CPUs, the IC693CPU331
modular CPU supports Override function and comes with a battery
backed clock. The default memory type available to this CPU is a
Random Access Memory (RAM) type and may also be installed with
optional EPROM or EEPROM. The IC693CPU331 can be installed in any
CPU baseplate, whether 5-slot or 10-slot baseplate. It can only be
installed to the dedicated CPU slot which is slot 1. This module
draws current from the backplane amounting to 350 mA @ 5VDC bus
voltage. As this modular CPU supports a larger amount of I/O, it
supports I/O expansion with the use of up to Four (4) expansion
baseplate of Remote I/O baseplate.
The GE Fanuc IC693CPU331 module is a 10 megahertz CPU module for
the GE Series 90-30 PLC systems. The IC693CPU331 module uses an
80188 series microprocessor. The operating temperature for the
module is from 32 to 140 degrees Celsius. The IC693CPU331 module
occupies a single slot in a 5-slot baseplate and it draws 350
milliamps of current from the backplane at 5 Volts DC input
voltage. The typical scan rate for the module is 0.4 milliseconds
per 1K of Boolean logic. There are 16 words allocated for system
registers which are for reference table viewing only and cannot be
referenced in the user logic program. The total number of timers
and counters supported by the IC693CPU331 module is 680. The type
of memory provided on the module for data storage is RAM and
optional EPROM or EEPROM. The maximum user program memory is 16
kilobytes. The number of discrete input points is 512. The number
of discrete output points is 512. The discrete global memory is
1280 bits. The memory allocated for analog inputs and analog
outputs is 128 words and 64 words, respectively. One built-in
serial port is available on the IC693CPU331 module and this port is
accessible through the power supply PLC connector. The protocols
supported by the serial port include the SNP slave and SNPX slave
protocols. A separate CMM module is required for SNP master SNP-X
master, CCM, and RTU slave support. A separate PCM module is
required for RTU master support. An AD693CMM301 module provides 2
additional serial ports for the IC693CPU331 module. An SLP (State
Logic Processor) is also compatible with the IC693CPU331 module and
it can be used to provide multi-tasking control.
The IC693CPU331 is a CPU module with a single slot. The module is
designed to work with the PLC 90-30 GE Fanuc. The module comes with
a clock speed of 10 megahertz and has a microprocessor type of
80188. Additionally, it features a single port for communication
and has 512 I/O discrete points: (Input + Output). In addition to
discrete points, the module can operate at a temperature of 32 to
140 degrees Celsius. Apart from that, the CPU module contains a
single slot per system for a five slot baseplate. It carries 350mA
of current from the backplane at 5V DC input voltage. The maximum
user program memory allocated to this CPU module is 16K Bytes. It
takes 0.4 milliseconds for one thousand Boolean Contacts to scan
with its scan rating feature. In addition, this baseplate single
slot CPU module by GE Fanuc accepts shift registers, and it also
includes a clock for a backed battery. The type of memory storage
supported by this module is RAM, and it has 680 timers. Moreover,
the module features inbuilt ports such as SNP/SNP-X slave
protocols. However, it will need a CMM module for SNP/SNP-X master
and CCM, or RTU slave support for a PCM module for RTU master
support. Besides that, the communication types compatible with this
module include LAN, Ethernet, FIP, Profibus, GBC, GCM, GCM+, and
others. Overall, the module features most of the useful components
and functions in this product line compared to some of the earlier
versions of the CPU baseplates.
Technical specifications for IC693CPU331
| Brand | GE Fanuc |
|---|
| Series | Series 90-30 |
|---|
| Manufacturer | GE Fanuc |
|---|
| Part Number | IC693CPU331 |
|---|
| Product Description | Modular CPU |
|---|
| Product type | CPU module |
|---|
| User memory | 16 Kbytes |
|---|
| Compatibility | GE Fanuc 90-30 PLCs |
|---|
| Processor type | 80188 |
|---|
| Clock speed | 10 Megahertz |
|---|
| Typical scan rate | 0.4 ms per 1K of Boolean logic |
|---|
| Microprocessor | 80188 |
|---|
| Processor speeds | 10 MHz |
|---|
| Serial port | 1 |
|---|
| Expandable | Yes |
|---|
| Discrete inputs | 512 |
|---|
| No. of extension baseplates | Four (4) expansion baseplate; Four (4) Remote I/O baseplate |
|---|
| Discrete outputs | 512 |
|---|
| Discrete Input Points - %I | 512 |
|---|
| Operating temperature | 32 to 140 degrees Fahrenheit |
|---|
| Discrete Output Points - %Q | 512 |
|---|
| Analog Inputs - %AI | 128 Words |
|---|
| Analog Outputs - %AQ | 64 words |
|---|
| Built-in Serial Ports | 1 (uses connector on PLC power supply). Supports SNP slave and
SNP-X slave protocols |
|---|
| Timers / Counters | 680 |
|---|
| Interrupts | No |
|---|
| Shift register | Yes |
|---|
| Current load: | 350mA |
|---|
| Bus voltage: | +5VDC |
|---|
Estimated Shipping Size of IC693CPU331
Dimensions: 7.0" x 2.0" x 7.0"
(17.8 cm x 5.1 cm x 17.8 cm)
Weight: 0 lbs 10.1 oz (0.3kg )
Tariff Code: 8537109060
