Product Description of IC693CPU374GP
The IC693CPU374 is a GE Fanuc Programmable Logic Controller (PLC)
module from the 90-30 series. This module is a processor module
that is used to host the user program, execute the logic and
managed data exchanges to and from the processor via the embedded
communication ports.
The IC693CPU374 may also be referred to as a controller. This
controller has built-in microprocessor with embedded 586 processor
with processing speed of 133 MHz. It has a typical scan rate of
0.15 miliseconds per 1K Boolean contact logic. This controller
module has a single slot width that is installed to the 90-30 PLC
rack.
The IC693CPU374 has a user memory of 240KB. It has Two (2) Ethernet
communication ports that supports transmission speed of 10/100 Mbps
with auto-sensing capability. These ports enable the controller to
be connected to an Ethernet network for communication with
programming workstations such as desktop or laptop computers,
communication with Human Machine Interface (HMI) and Supervisory
Control and Data Acquisition (SCADA) systems as well as other
processors for messaging functions. This controller may also be
communicated through the RS485 communication interfaces that can be
found on the power supply whether standard or high-capacity power
supply.
This controller accepts user program that is developed using a
variety of programming software applications such as VersaPro 2.03
or later, CIMPLICITY Machine Edition Logic Developer 2.60 or later
and Control software version 2.50 or later. When performing online
edit to a controller with existing user program, utilize the same
software with equal or higher version.
The IC693CPU374 CPU features a processor speed of 133 Megahertz and
a total user memory of 240 KB. The program memory can be configured
according to the application requirements and it includes a
register memory that is configurable within a range of 128 to
32,640 words, and a configurable memory for analog inputs and
analog outputs. The memory for system registers supports up to 28
words and the users can set up around 2000 timers and counters. The
IC693CPU374 CPU features the 80386EX processor of the AMD SC520
type and it has 2 built-in Ethernet ports that allow 10/100
base-T/TX communication. The featured Ethernet ports are connected
through RJ-45 connectors. The unit also supports an RS-485 port on
the power supply and it allows for communication through the SNP
and SNPX protocols. In addition to that, the unit supports several
program storage devices that are often used.
Technical specifications for IC693CPU374
| Brand | GE Fanuc |
|---|
| Series | Series 90-30 |
|---|
| Part Number | IC693CPU374 |
|---|
| Number of I/O points | 2048 |
|---|
| Processor speed | 133 Megahertz |
|---|
| Register memory | 240 kilobytes |
|---|
| Power requirements | 7.4 Watts at 5 Volts DC |
|---|
| Floating point math | Yes |
|---|
| Processor model | Embedded 586 |
|---|
| Serial port | RS-485 (via power supply |
|---|
| Number of Ethernet ports | 2 |
|---|
| Operating temperature | 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) |
|---|
| Storage temperature | -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit) |
|---|
| CPU type | Single slot CPU module with embedded Ethernet Interface |
|---|
| Typical Scan Rate | 0.15 milliseconds per 1K of logic (boolean contacts) |
|---|
| Type of Memory Storage | RAM and Flash |
|---|
| Processor type | AMD SC520 |
|---|
The GE Fanuc IC693CPU374 is a Series 90-30 Processor module. This
module is a CPU 374 module with single slot width, processor speed
of 133 MHz with typical scan rate of 0.15 ms per 1K of logic for
Boolean contacts. It has an embedded user memory of 240KB with Two
(2) Ethernet communication ports.
