Description OF 1788-ENBT
The Allen-Bradley 1788-ENBT is an Ethernet I/P communication
module. This electronic card is specifically called an Ethernet I/P
daughtercard that fits directly to a assigned slot of a FlexLogix
controller. The 1788-ENBT has One (1) RJ45 physical port that
supports interfacing to Ethernet I/P networks with transmission
speed of 10 Mbps / 100 Mbps in half or full-duplex modes.
The 1788-ENBT has a small form factor. It is powered through the
backplane and requires 5V dc @ 465mA with Power consumption of 5 V
dc, 2.33W and thermal dissipation of 8.0 BTU/hr. It has an isolated
voltage rating of 500V ac for 60 seconds.
The 1788-ENBT has supports direct connection or interfacing via a
standard Ethernet switches. It has simple cable requirements thus,
no cable scheduling and routing is needed. This communication port
supports communication with Human Machine Interface (HMI),
Supervisory Control and Data Acquisition (SCADA), converters, and
gateways. It may also be utilized in sending and receiving messages
to and from controllers in the network.
The 1788-ENBT is equipped with status LED indicators used for
indicating the Network status, Link status and Utilization percent
indicator.
The 1788-ENBT does not support removal and installation under power
(RIUP). When installing this module, ensure that the FlexLogix
controller is without power.
The daughtercard has Four (4) status LEDs such as link status LED,
module status LED, the network status LED, and utilization percent
LED. The 1788-ENBT has One (1) RJ45 port used for Ethernet
interface. Before installing the daughtercard, ensure that the
power is disconnected to avoid electrical arcs.
Technical specifications for 1788-ENBT
| Brand | Allen-Bradley |
|---|
| Manufacturer: | Rockwell Automation |
|---|
| Product Type: | Ethernet I/P Daughtercard |
|---|
| Supported Protocol: | Ethernet I/P |
|---|
| Supported Transmission rate: | 10/100 Mbps; Full and Half duplex |
|---|
| Power Requirements: | 5V dc @ 465mA |
|---|
| Power Consumption, max: | 5 V dc, 2.33W |
|---|
| Thermal Dissipation, max: | 8.0 BTU/hr |
|---|
| Isolation Voltage: | Tested to withstand 500V ac for 60 seconds |
|---|
| Ethernet Conductors: | 802.3 compliant - twisted pair |
|---|
| Ethernet Connector: | RJ45 Category 5 |
|---|
| Operating Temperature: | EC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd,
Operating Dry Heat), IEC 60068-2-14 (Test Nb, Operating Thermal
Shock): 0...60 o C (32...140 o F) |
|---|
| Non-Operating Temperature: | IEC 60068-2-1 (Test Ab, Un-packaged Nonoperating Cold), IEC
60068-2-2 (Test Bc, Un-packaged Nonoperating Dry Heat), IEC
60068-2-14 (Test Na, Un- packaged Nonoperating Thermal Shock):
–40...85 o C |
|---|
| Compatible Controller: | FlexLogix Controller |
|---|
| LED indicators: | Network, Link and Utilization Percent indicators |
|---|
| Product/Catalog Number | 1788-ENBT |
|---|
| Porduct Type | daughtercard |
|---|
| Network | Ethernet |
|---|
| Connector Port | RJ45 |
|---|
Features OF 1788-ENBT:
- 1 RJ-45 Ethernet port
- Supports 10 Mbps / 100 Mbps transmission speed
- Supports 32 CIP connections
- Available in original packaging
- In stock
